DinizApp/Electronics Center

1

Electronics
Electronics

Eletrônica
2

Always use analog multimeter to test this component
Always use analog multimeter to test this component

Para testar este componente sempre use o multímetro analógico
3

Select the x1 scale
Select the x1 scale

Selecione a escala de x1
4

Take the probes to measure the SCR
Take the probes to measure the SCR

Pegue as ponteiras para medir o SCR
5

Put the black probe on anode and the red probe on cathode. To test the shot, close a contact between anode and gate by clicking the trigger. The multimeter should show a low resistance.
Put the black probe on anode and the red probe on cathode. To test the shot, close a contact between anode and gate by clicking the trigger. The multimeter should show a low resistance.

Coloque a ponteira preta no anodo e a vermelha no catodo, para testar o disparo feche um curto entre o anodo e o gate clicando em disparo. O multimetro deverá mostrar uma resistência baixa.
6

No reading should appear with inverted probes.
No reading should appear with inverted probes.

Se inverter as ponteiras não devemos obter nenhuma leitura.
7

Putting the black probe on gate and the red probe on cathode, the reading should show a low resistance.
Putting the black probe on gate and the red probe on cathode, the reading should show a low resistance.

Colocando a ponteira preta no gate e a ponteira vermelha no catodo temos que obter uma leitura de baixa resistência.
8

In other positions should mark infinite.
In other positions should mark infinite.

Nas outras posições deverá marcar infinito.
9

SCR measurement
SCR measurement

Medição de SCR
10

Shoot
Shoot

Disparo
11

TRIAC in good condition
TRIAC in good condition

Triac em bom estado
12

Burned TRIAC
Burned TRIAC

Triac queimado

Load more strings »

No more segments to load.

Loading more segments…

DinizApp/Electronics Center

Total

Completed

Unproofread

Untranslated

To verify