DinizApp/Electronics Center
-
An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire, when there is a potential difference between the conductor’s ends. The moving charged particles seek to restore the lost balance due for the electric field action or others (chemical reactions, friction, light…).
An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire, when there is a potential difference between the conductor’s ends. The moving charged particles seek to restore the lost balance due for the electric field action or others (chemical reactions, friction, light…).
Corrente elétrica é o fluxo ordenado de partículas portadoras de carga elétrica, ou também, é o deslocamento de cargas dentro de um condutor, quando existe uma diferença de potencial elétrico entre as extremidades. Tal deslocamento procura restabelecer o equilíbrio desfeito pela ação de um campo elétrico ou outros meios (reações químicas, atrito, luz, etc.) -
The electrical resistance of an electrical conductor is a measure of the difficulty to pass an electric current through that conductor. The first Ohm's Law calculates the electrical resistance, and its SI unit is the ohm (Ω). When an electrical current is stablished in a metallic conductor, a high number of electrons can flow freely in this conductor. In this movement, the electrons collide with each other and with the atoms that constitute the metal. Therefore, the electrons have some difficult to move in, in other words, there is a difficulty to pass an electric current through that conductor.
The electrical resistance of an electrical conductor is a measure of the difficulty to pass an electric current through that conductor. The first Ohm's Law calculates the electrical resistance, and its SI unit is the ohm (Ω).
When an electrical current is stablished in a metallic conductor, a high number of electrons can flow freely in this conductor. In this movement, the electrons collide with each other and with the atoms that constitute the metal. Therefore, the electrons have some difficult to move in, in other words, there is a difficulty to pass an electric current through that conductor.Resistência elétrica é a capacidade de um corpo qualquer se opor à passagem de corrente elétrica mesmo quando existe uma diferença de potencial aplicada. Seu cálculo é dado pela Primeira Lei de Ohm, e, segundo o Sistema Internacional de Unidades (SI), é medida em ohms.
Quando uma corrente elétrica é estabelecida em um condutor metálico, um número muito elevado de elétrons livres passa a se deslocar nesse condutor. Nesse movimento, os elétrons colidem entre si e também contra os átomos que constituem o metal. Portanto, os elétrons encontram uma certa dificuldade para se deslocar, isto é, existe uma resistência à passagem da corrente no condutor. -
Click here!
Click here!
Clique aqui! -
Electricity
Electricity
Eletricidade -
Voltage
Voltage
tensão -
Electric current
Electric current
corrente -
Electrical resistance
Electrical resistance
resistência -
A semiconductor diode is a two-terminal electronic component. The most common type, is a crystalline piece of semiconductor material with a p–n junction connected to two electrical terminals. Most diodes are made of silicon, but other materials such as selenium and germanium are also used. It’s the simplest semiconductor electronic component, used as electrical current rectifier and other applications. It has a voltage drop about 0,3V (germanium) and 0,7V (silicon). Diode works as an auto-start switch (closed when it is directly polarized and open when it is inversely polarized). The greater difference is that when directly polarized, there is a bigger voltage drop in diode than it has in mechanical switches (0,7V in silicon diode). So, in a 10V voltage source, a directly polarized diode in series with a resistance makes a 9,3V voltage drop in the resistance (0,7V remain in the diode). In reverse bias, the diode works as an open switch, since current doesn’t flow, there will be no voltage on the resistor, which stays retained in the diode. That is, there is a 10V voltage on the diode terminals. The main function of a semiconductor diode, in current rectifier circuits, is to transform alternate current in pulsating direct current. The main function of a semiconductor diode, in direct current circuits, is to control the current flow, allowing the electric current to pass in only one direction.
A semiconductor diode is a two-terminal electronic component. The most common type, is a crystalline piece of semiconductor material with a p–n junction connected to two electrical terminals. Most diodes are made of silicon, but other materials such as selenium and germanium are also used.
It’s the simplest semiconductor electronic component, used as electrical current rectifier and other applications. It has a voltage drop about 0,3V (germanium) and 0,7V (silicon).
Diode works as an auto-start switch (closed when it is directly polarized and open when it is inversely polarized). The greater difference is that when directly polarized, there is a bigger voltage drop in diode than it has in mechanical switches (0,7V in silicon diode). So, in a 10V voltage source, a directly polarized diode in series with a resistance makes a 9,3V voltage drop in the resistance (0,7V remain in the diode). In reverse bias, the diode works as an open switch, since current doesn’t flow, there will be no voltage on the resistor, which stays retained in the diode. That is, there is a 10V voltage on the diode terminals.
The main function of a semiconductor diode, in current rectifier circuits, is to transform alternate current in pulsating direct current. The main function of a semiconductor diode, in direct current circuits, is to control the current flow, allowing the electric current to pass in only one direction.
Diodo semicondutor é um elemento ou componente eletrônico composto de cristal semicondutor de silício ou germânio numa película cristalina cujas faces opostas são dopadas por diferentes materiais durante sua formação, que causa a polarização de cada uma das extremidades.
É o tipo mais simples de componente eletrônico semicondutor, usado como retificador de corrente elétrica entre outras aplicações. Possui uma queda de tensão de, aproximadamente, 0,3 V (germânio) e 0,7 V (silício)
O diodo funciona como uma chave de acionamento automático (fechada quando o diodo está diretamente polarizado e aberta quando o diodo está inversamente polarizado). A diferença mais substancial é que, quando diretamente polarizado, há uma queda de tensão no diodo muito maior do que aquela que geralmente se observa em chaves mecânicas (no caso do diodo de silício, 0,7 V). Assim, uma fonte de tensão de 10 V, polarizando diretamente um diodo em série com uma resistência, faz com que haja uma queda de tensão de 9,3 V na resistência, pois 0,7 V ficam no diodo. Na polarização inversa, acontece o seguinte: o diodo faz papel de uma chave aberta, já que não circula corrente, não haverá tensão no resistor, a tensão fica toda retida no diodo, ou seja, nos terminais do diodo há uma tensão de 10 V.
A principal função de um diodo semicondutor, em circuitos retificadores de corrente, é transformar corrente alternada em corrente contínua pulsante. Como no semiciclo negativo de uma corrente alternada o diodo faz a função de uma chave aberta, não passa corrente elétrica no circuito (considerando o “sentido convencional de corrente”, do “positivo” para o “negativo”). A principal função de um diodo semicondutor, em circuitos de corrente contínua, é controlar o fluxo da corrente, permitindo que a corrente elétrica circule apenas em um sentido -
57
57
Diodo Zener (também conhecido como diodo regulador de tensão , diodo de tensão constante, diodo de ruptura ou diodo de condução reversa) é um dispositivo ou componente eletrônico semelhante a um diodo semicondutor, especialmente projetado para trabalhar sob o regime de condução inversa, ou seja, acima da tensão de ruptura da junção PN, neste caso há dois fenômenos envolvidos o efeito Zener e o efeito avalanche.O dispositivo leva o nome em homenagem a Clarence Zener, que descobriu esta propriedade elétrica.
Qualquer diodo inversamente polarizado praticamente não conduz corrente desde que não ultrapasse a tensão de ruptura. Na realidade, existe uma pequena corrente inversa, chamada de corrente de saturação, que ocorre devido unicamente à geração de pares de elétron-lacuna na região de carga espacial, à temperatura ambiente. No diodo Zener acontece a mesma coisa. A diferença é que, no diodo convencional, ao atingir uma determinada tensão inversa, a corrente inversa aumenta bruscamente (efeito de avalanche), causando o efeito Joule, e consequentemente a dissipação da energia térmica acaba por destruir o dispositivo, não sendo possível reverter o processo. No diodo Zener, por outro lado, ao atingir uma tensão chamada de Zener (geralmente bem menor que a tensão de ruptura de um diodo comum[carece de fontes]), o dispositivo passa a permitir a passagem de correntes bem maiores que a de saturação inversa, mantendo constante a tensão entre os seus terminais. Cada diodo Zener possui uma tensão de Zener específica como, por exemplo, 5,1 Volts, 6,3 Volts, 9,1 Volts, 12 Volts e 24 Volts.
Quanto ao valor da corrente máxima admissível unilateralmente, existem vários tipos de diodos. Um dado importante na especificação do componente a ser utilizado é a potência do dispositivo. Por exemplo, existem diodos Zener de 400 mili Watts e 1 Watt. O valor da corrente máxima admissível depende dessa potência e da tensão de Zener. É por isso que o diodo Zener se encontra normalmente associado com uma resistência ligada em série, destinada precisamente a limitar a corrente a um valor admissível. -
Zener Diode
Zener Diode
Diodo Zener -
Complete the table with the information and click calculate. (use dot instead of comma):
Complete the table with the information and click calculate.
(use dot instead of comma):Preencha com os dados da tabela e clique em calcular.
(use ponto no lugar de vírgula): -
____Code_______Vz______Potency_______
____Code_______Vz______Potency_______
____Código_______Vz______Potência_______ -
This resource is only available in Pro Version.
This resource is only available
in Pro Version.Este recurso está disponível
somente na versão Pro.
-
3 Digits SMD-resistor
3 Digits SMD-resistor
Resistor SMD 3 Dígitos -
Underline
Underline
Sublinhado -
For 1% tolerance resistors, there is a new codification known as EIA-90.
For 1% tolerance resistors, there is a
new codification known as EIA-90.Para resistores com 1% de tolerância foi criada uma
nova codificação conhecida por EIA-90. -
4 Digits SMD-resistor
4 Digits SMD-resistor
Resistor SMD 4 Dígitos -
Inductors
Inductors
Indutores -
This resource is in development, keep your app updated to receive it as soon as it's created.
This resource is in development, keep your app updated to receive it as soon as it's created.
Recurso em Desenvolvimento, mantenha seu aplicativo sempre atualizado para recebe-lo assim que for criado. -
Series and Parallel Resistors
Series and Parallel Resistors
Res. Série e Paralelo