UESTC/Electrodroid tarjima
-
ne_warning
ne_warning
R1 and R2 should be between 1KΩ and 10MΩ to get correct results.
In monostable mode, R1 should be in the range 1KΩ to 1MΩ. -
ne_pulse
ne_pulse
Pulse Time -
filt_txtDescr
filt_txtDescr
Compute the cut-off frequency of the filter -
pcb_req_width
pcb_req_width
Required Trace Width: -
pcb_track_res
pcb_track_res
Track Resistance: -
pcb_volt_drop
pcb_volt_drop
Voltage Drop: -
pcb_track_loss
pcb_track_loss
Power Loss: -
pcb_track_length
pcb_track_length
Trace Length -
pcb_trise_descr
pcb_trise_descr
Allowed Temperature Rise -
pcb_temp_descr
pcb_temp_descr
Ambient Temperature -
pcb_thick_descr
pcb_thick_descr
Copper Thickness -
pcb_layer_descr
pcb_layer_descr
Trace Layer -
pcb_layer_spin_0
pcb_layer_spin_0
External (in Air) -
pcb_layer_spin_1
pcb_layer_spin_1
Internal -
pcb_descr
pcb_descr
The calculation approximates the IPC-2221 standard. Results are valid up to 35A (17.5A for internal trace), 400mil widths and a maximum temperature rise of 100°C. -
rtd_descr
rtd_descr
Calculate standard PT100 resistance or temperature -
energy_descr
energy_descr
Convert energy units. -
decibel
decibel
Decibels -
db_descr
db_descr
Set the quantity type and decibel unit, and enter the value to convert. -
db_quantity
db_quantity
Quantity type
No more segments to load.
Loading more segments…
© 2009-2024 WebTranslateIt Software S.L. All rights reserved.
Terms of Service
·
Privacy Policy
·
Security Policy