UESTC/Electrodroid tarjima
-
res_smd_warning
res_smd_warning
Some resistor can also be marked with a long bar under the code. The underline is used when the starting 'R' has to be omitted due to the limited space; in this case insert a 'R' in the calculator (e.g.,<u>068</u>= R068 = 0.068Ω).
There are many exceptions to these rule, so always check the manufacturer's datasheet. -
set_this
set_this
Set this value -
potenza_diss
potenza_diss
The power dissipated by the resistor is: -
diodo
diodo
diode -
potenza_dissip
potenza_dissip
The power dissipated by the circuit is: -
led_tipi_comuni
led_tipi_comuni
Enter the forward voltage drop (Vf) and current (If) of the LED, or choose one from the following box: -
led_numLEDserie
led_numLEDserie
Number of LEDs in series -
led_Vccpiccola
led_Vccpiccola
Vcc is too small for the selected number of LEDs -
add_led
add_led
Add new LED -
led_color
led_color
LED color -
led_type
led_type
LED type -
edit_led_title
edit_led_title
Customize LEDs list -
edit_led_description
edit_led_description
Add a new LED in the database, or modify/erase an existing LED (you can't edit built-in LEDs, but you can hide them from the list) -
edit_led_invalid
edit_led_invalid
Insert a valid Color name -
led_only_custom
led_only_custom
Show built-in LEDs -
edit_led_removed
edit_led_removed
LED removed from Database -
enableRL
enableRL
Enable load RL -
part_txtDescr2
part_txtDescr2
Enter R1,R2,Vin to calculate Vout, or enter the ratio R1/R2 or Vin/Vout to calculate the resistors R1 and R2: -
lock_value
lock_value
Lock value: -
ratio_possib
ratio_possib
You can get the ratio with:
No more segments to load.
Loading more segments…
© 2009-2024 WebTranslateIt Software S.L. All rights reserved.
Terms of Service
·
Privacy Policy
·
Security Policy