UESTC/Electrodroid tarjima
-
Series / Tolerance
Series / Tolerance
-
Temperature Coeff.
Temperature Coeff.
-
Show colors of nearest standard value if possible
Show colors of nearest standard value if possible
-
Displayed value:
Displayed value:
-
Nearest standard value:
Nearest standard value:
-
The Resistor value can be:
The Resistor value can be:
-
Insert the marking code of the SMD resistor:
Insert the marking code of the SMD resistor:
-
Some resistor can also be marked with a long bar under the code. The underline is used when the starting 'R' has to be omitted due to the limited space; in this case insert a 'R' in the calculator (e.g., <u>068</u> = R068 = 0.068Ω). There are many exceptions to these rule, so always check the manufacturer's datasheet.
Some resistor can also be marked with a long bar under the code. The underline is used when the starting 'R' has to be omitted due to the limited space; in this case insert a 'R' in the calculator (e.g.,
<u>068</u>= R068 = 0.068Ω).
There are many exceptions to these rule, so always check the manufacturer's datasheet. -
Set this value
Set this value
-
The power dissipated by the resistor is:
The power dissipated by the resistor is:
-
diode
diode
-
The power dissipated by the circuit is:
The power dissipated by the circuit is:
-
Enter the forward voltage drop (Vf) and current (If) of the LED, or choose one from the following box:
Enter the forward voltage drop (Vf) and current (If) of the LED, or choose one from the following box:
-
Number of LEDs in series
Number of LEDs in series
-
Vcc is too small for the selected number of LEDs
Vcc is too small for the selected number of LEDs
-
Add new LED
Add new LED
-
LED color
LED color
-
LED type
LED type
-
Customize LEDs list
Customize LEDs list
-
Add a new LED in the database, or modify/erase an existing LED (you can't edit built-in LEDs, but you can hide them from the list)
Add a new LED in the database, or modify/erase an existing LED (you can't edit built-in LEDs, but you can hide them from the list)