Fulmine Software/Flashlight
-
Rangere denne app
Rangere denne app
Rate this app -
instructions_home_and_back_buttons_exit
instructions_home_and_back_buttons_exit
Press "Home" to exit the app while leaving LED light turned on. Press "Back" to turn off LED light on app exit: -
instructions_tap
instructions_tap
Tap screen to show controls: -
instructions_back
instructions_back
Press back button to turn off screen light: -
instructions_slide_up_down_on_left
instructions_slide_up_down_on_left
Slide up or down on left side to adjust brightness: -
instructions_slide_up_down_on_right
instructions_slide_up_down_on_right
Slide up or down on right side to adjust color: -
instructions_double_tap_on_left
instructions_double_tap_on_left
Double tap on left side to set full brightness: -
instructions_double_tap_on_right
instructions_double_tap_on_right
Double tap on right side to set white color: -
support_btn_problem_led_not_working
support_btn_problem_led_not_working
LED light is not turning on -
support_problem_led_not_working_1
support_problem_led_not_working_1
1. Check to see if your device is equipped with a LED element. If not, you may use screen light instead. -
support_problem_led_not_working_2
support_problem_led_not_working_2
2. Make sure that you've turned on LED light button before turning on light. -
support_btn_led_not_working_additional_info
support_btn_led_not_working_additional_info
Here you can enter additional info to the technical support team. Please use English if possible: -
support_btn_send_led_report
support_btn_send_led_report
Submit LED test report -
support_problem_led_not_all_tests_done
support_problem_led_not_all_tests_done
Not all LED types were tested. Please test all of them before submitting this report. -
Jeg har andre problem
Jeg har andre problem
I have other problems -
Vennligst beskriv problemet nedenfor og trykk \"%1$s\" knappen. Skriv helst på engelsk hvis mulig.
Vennligst beskriv problemet nedenfor og trykk \"%1$s\" knappen. Skriv helst på engelsk hvis mulig.
Please describe your problem below and press the "%1$s" button. Please use English if possible. -
Problembeskrivelse:
Problembeskrivelse:
Problem description: -
Send rapport
Send rapport
Submit report -
Angi problembeskrivelse før du sender rapporten.
Angi problembeskrivelse før du sender rapporten.
Please provide problem description before submitting report. -
Du blir bedt om å velge e-postklienten du vil bruke til å sende oss rapporten. Vennligst ikke redigere e-post melding, bare send den. Den vil inneholde informasjon som vil hjelpe oss med å løse problemet.
Du blir bedt om å velge e-postklienten du vil bruke til å sende oss rapporten. Vennligst ikke redigere e-post melding, bare send den. Den vil inneholde informasjon som vil hjelpe oss med å løse problemet.
You'll be asked to choose the desired e-mail client for submitting the report.Please don't edit the e-mail content, just submit it. It will contain information instrumental for solving your problem.