UESTC/Electrodroid tarjima
-
res_standard
res_standard
This is a standard %1$s value. -
res_no_standard
res_no_standard
This is a NON standard %1$s value. -
res_menu
res_menu
Use the MENU to choose the number of bands -
res_band
res_band
%1$d Bands -
res_inv_descr
res_inv_descr
Insert resistor value to get the colors -
res_inv_band
res_inv_band
Select the number of bands -
res_inv_toll
res_inv_toll
Series / Tolerance -
res_inv_prec
res_inv_prec
Temperature Coeff. -
res_inv_chkstandard
res_inv_chkstandard
Show colors of nearest standard value if possible -
res_inv_disp
res_inv_disp
Displayed value: -
res_inv_near
res_inv_near
Nearest standard value: -
res_smd_result
res_smd_result
The Resistor value can be: -
res_smd_descr
res_smd_descr
Insert the marking code of the SMD resistor: -
res_smd_warning
res_smd_warning
Some resistor can also be marked with a long bar under the code. The underline is used when the starting 'R' has to be omitted due to the limited space; in this case insert a 'R' in the calculator (e.g.,<u>068</u>= R068 = 0.068Ω).
There are many exceptions to these rule, so always check the manufacturer's datasheet. -
set_this
set_this
Set this value -
potenza_diss
potenza_diss
The power dissipated by the resistor is: -
diodo
diodo
diode -
potenza_dissip
potenza_dissip
The power dissipated by the circuit is: -
led_tipi_comuni
led_tipi_comuni
Enter the forward voltage drop (Vf) and current (If) of the LED, or choose one from the following box: -
led_numLEDserie
led_numLEDserie
Number of LEDs in series
Il n’a plus de segments à afficher.
Chargement d’autres segments en cours…
© 2009-2024 WebTranslateIt Software S.L. Tous droits réservés.
Termes d’utilisation
·
Politique de confidentialité
·
Politique de sécurité
usage example: "This is a standard 5% (E24) value"