UESTC/Electrodroid tarjima
-
voltage_ACw
voltage_ACw
AC %1$d-phase %2$d-wire -
ne_descriz
ne_descriz
Select the NE555 mode, and insert the values -
ne_warning
ne_warning
R1 and R2 should be between 1KΩ and 10MΩ to get correct results.
In monostable mode, R1 should be in the range 1KΩ to 1MΩ. -
ne_pulse
ne_pulse
Pulse Time -
filt_txtDescr
filt_txtDescr
Compute the cut-off frequency of the filter -
pcb_req_width
pcb_req_width
Required Trace Width: -
pcb_track_res
pcb_track_res
Track Resistance: -
pcb_volt_drop
pcb_volt_drop
Voltage Drop: -
pcb_track_loss
pcb_track_loss
Power Loss: -
pcb_track_length
pcb_track_length
Trace Length -
pcb_trise_descr
pcb_trise_descr
Allowed Temperature Rise -
pcb_temp_descr
pcb_temp_descr
Ambient Temperature -
pcb_thick_descr
pcb_thick_descr
Copper Thickness -
pcb_layer_descr
pcb_layer_descr
Trace Layer -
pcb_layer_spin_0
pcb_layer_spin_0
External (in Air) -
pcb_layer_spin_1
pcb_layer_spin_1
Internal -
pcb_descr
pcb_descr
The calculation approximates the IPC-2221 standard. Results are valid up to 35A (17.5A for internal trace), 400mil widths and a maximum temperature rise of 100°C. -
rtd_descr
rtd_descr
Calculate standard PT100 resistance or temperature -
energy_descr
energy_descr
Convert energy units. -
decibel
decibel
Decibels
Il n’a plus de segments à afficher.
Chargement d’autres segments en cours…
© 2009-2024 WebTranslateIt Software S.L. Tous droits réservés.
Termes d’utilisation
·
Politique de confidentialité
·
Politique de sécurité
used in Voltage drop Calculator