UESTC/Electrodroid tarjima

Some resistor can also be marked with a long bar under the code. The underline is used when the starting 'R' has to be omitted due to the limited space; in this case insert a 'R' in the calculator (e.g., <u>068</u> = R068 = 0.068Ω). 
 
There are many exceptions to these rule, so always check the manufacturer's datasheet.

Set this value

The power dissipated by the resistor is:

diode

The power dissipated by the circuit is:

Enter the forward voltage drop (Vf) and current (If) of the LED, or choose one from the following box:

Number of LEDs in series

Vcc is too small for the selected number of LEDs

Add new LED

LED color

LED type

Customize LEDs list

Add a new LED in the database, or modify/erase an existing LED (you can't edit built-in LEDs, but you can hide them from the list)

Insert a valid Color name

Show built-in LEDs

LED removed from Database

Enable load RL

Enter R1,R2,Vin to calculate Vout, or enter the ratio R1/R2 or Vin/Vout to calculate the resistors R1 and R2:

Lock value:

You can get the ratio with: