UESTC/Electrodroid tarjima
-
Lock R1 value
Lock R1 value
-
Calculate the value of resistance
Calculate the value of resistance
-
This is a standard %1$s value.
This is a standard %1$s value.
-
This is a NON standard %1$s value.
This is a NON standard %1$s value.
-
Use the MENU to choose the number of bands
Use the MENU to choose the number of bands
-
%1$d Bands
%1$d Bands
-
Insert resistor value to get the colors
Insert resistor value to get the colors
-
Select the number of bands
Select the number of bands
-
Series / Tolerance
Series / Tolerance
-
Temperature Coeff.
Temperature Coeff.
-
Show colors of nearest standard value if possible
Show colors of nearest standard value if possible
-
Displayed value:
Displayed value:
-
Nearest standard value:
Nearest standard value:
-
The Resistor value can be:
The Resistor value can be:
-
Insert the marking code of the SMD resistor:
Insert the marking code of the SMD resistor:
-
Some resistor can also be marked with a long bar under the code. The underline is used when the starting 'R' has to be omitted due to the limited space; in this case insert a 'R' in the calculator (e.g., <u>068</u> = R068 = 0.068Ω). There are many exceptions to these rule, so always check the manufacturer's datasheet.
Some resistor can also be marked with a long bar under the code. The underline is used when the starting 'R' has to be omitted due to the limited space; in this case insert a 'R' in the calculator (e.g.,
<u>068</u>= R068 = 0.068Ω).
There are many exceptions to these rule, so always check the manufacturer's datasheet. -
Set this value
Set this value
-
The power dissipated by the resistor is:
The power dissipated by the resistor is:
-
diode
diode
-
The power dissipated by the circuit is:
The power dissipated by the circuit is: