DinizApp/Electronics Center
-
Diode
Diode
Diodo -
TRIAC
TRIAC
Triac -
UJT
UJT
TJU -
LED
LED
LED -
FET
FET
FET -
SCR (Silicon-Controlled Rectifier)
SCR
(Silicon-Controlled Rectifier)SCR (Retificador
Controlado de Silício) -
SCR or Silicon Controlled Diode is one of the most important components in applications of power load control of high values from electrical grid. Working as a switch electronically triggered, it easily exceeds its mechanical equivalent, for its speed, sensibility and capacity of working in high voltage and current. There is no limit for the number of practical applications it can be used, which is important for all of us know a little about its operation principle, its limitations and main applications. SCRs can work as trigger elements of electronics circuits, as solid-state relays, high power oscillators, power controls in AC circuits, inverters circuits and many applications which other semiconductors as bipolar transistors, field-effect transistors and common diodes cannot be used. SCRs have a structure that manifests electrical properties that allows they be used in all of this applications. So, initially we can say that what differentiate a SCR of other common components as diodes and transistors is its structure which gives it well-defined properties. Summing up, SCR can be understood as a diode that just conducts after the shot and just stop conducting after cutting the anode current.
SCR or Silicon Controlled Diode is one of the most important components in applications of power load control of high values from electrical grid. Working as a switch electronically triggered, it easily exceeds its mechanical equivalent, for its speed, sensibility and capacity of working in high voltage and current. There is no limit for the number of practical applications it can be used, which is important for all of us know a little about its operation principle, its limitations and main applications.
SCRs can work as trigger elements of electronics circuits, as solid-state relays, high power oscillators, power controls in AC circuits, inverters circuits and many applications which other semiconductors as bipolar transistors, field-effect transistors and common diodes cannot be used.
SCRs have a structure that manifests electrical properties that allows they be used in all of this applications. So, initially we can say that what differentiate a SCR of other common components as diodes and transistors is its structure which gives it well-defined properties.
Summing up, SCR can be understood as a diode that just conducts after the shot and just stop conducting after cutting the anode current.
O SCR ou Diodo Controlado de Silício é um dos componentes mais importantes nas aplicações em que esteja envolvido o contole de cargas de potência de altos valores a partir da rede de energia. Funcionando como um interruptor acionado eletronicamente ele facilmente supera seus equivalentes mecânicos, por sua velocidade, sensibilidade e capacidade de operar com tensäes e correntes elevadas. Não há limite para o número de aplicações práticas em que ele pode ser usado o que torna muito importante para todos conhecer um pouco de seu princípio de funcionamento, suas limitações e suas apicações principais.
O SCRs ou diodos controlados de silício podem funcionar como elementos de disparo de circuitos eletrônicos, como relês de estado sólido, como osciladores de alta potência, como controles de potência em circuitos de corrente alternada, circuitos inversores e em uma infinidade de aplicações em que outros semicondutores tais como transistores bipolares, transistores de efeito de campo de potência e diodos comuns não podem ser usados.
Os SCRs tem uma estrutura tal que manifesta propriedades elétricas que permitem que ele seja usado em todas estas aplicações. Assim, inicialmente podemos dizer que o que diferencia um SCR de outros componentes comuns tais como diodos retificadores comuns, e transistores é a sua estrutura que lhe confere propriedades bem definidas
Resumindo o SCR pode ser entendido como um diodo que conduz somente depois do disparo e somente deixa de conduzir após cortar a corrente do anodo. -
Animation
Animation
Animação -
Unijunction Transistor
Unijunction
TransistorTransistor de
Unijunção -
Unijunction transistors (UJT) are semiconductor devices whose symbol and structure are shown in the picture. These components have a negative resistance feature that makes it ideal to relaxation oscillators operations, with basic configuration. Unijunction transistors (UJT) aren’t easily found in practical applications anymore.
Unijunction transistors (UJT) are semiconductor devices whose symbol and structure are shown in the picture.
These components have a negative resistance feature that makes it ideal to relaxation oscillators operations, with basic configuration.
Unijunction transistors (UJT) aren’t easily found in practical applications anymore.
Os transistores unijunção (TUJ) ou Unijunction Transistors (UJT) são dispositivos semicondutores cujo símbolo e estrutura são mostrados na figura.
Estes componentes possuem uma característica de resistência negativa que os torna ideal para operação em osciladores de relaxação, com a configuração básica.
Os transistores unijunção quase não mais são encontrados em aplicações práticas.
-
TRIAC, from triode for alternating current, is an electronic component equivalent to two thyristors (SCRs) connected in antiparallel with their gates connected together. TRIACs differ from SCRs in that they allow current flow in both directions, whereas an SCR can only conduct current in a single direction. TRIACs are subset of thyristors. A TRIAC can be triggered by an alternating current applied in the gate. Once triggered, TRIACs continue to conduct, even if the gate current ceases, until the main current drops below a certain level called the holding current. TRIACs' bidirectionality makes them convenient switches for alternating-current (AC). In addition, applying a trigger at a controlled phase angle of the AC in the main circuit allows control of the average current flowing into a load (phase control). Low-power TRIACs are used in many applications such as light dimmers, speed controls for electric fans and other electric motors. When used to control reactive (inductive or capacitive) loads, care must be taken to ensure that the TRIAC turns off correctly at the end of each half-cycle of the AC in the main circuit. For higher-powered, more-demanding loads, two SCRs in inverse parallel may be used instead of one TRIAC. Because each SCR will have an entire half-cycle of reverse polarity voltage applied to it, turn-off of the SCRs is assured, no matter what the character of the load.
TRIAC, from triode for alternating current, is an electronic component equivalent to two thyristors (SCRs) connected in antiparallel with their gates connected together. TRIACs differ from SCRs in that they allow current flow in both directions, whereas an SCR can only conduct current in a single direction. TRIACs are subset of thyristors.
A TRIAC can be triggered by an alternating current applied in the gate. Once triggered, TRIACs continue to conduct, even if the gate current ceases, until the main current drops below a certain level called the holding current. TRIACs' bidirectionality makes them convenient switches for alternating-current (AC).
In addition, applying a trigger at a controlled phase angle of the AC in the main circuit allows control of the average current flowing into a load (phase control).
Low-power TRIACs are used in many applications such as light dimmers, speed controls for electric fans and other electric motors.
When used to control reactive (inductive or capacitive) loads, care must be taken to ensure that the TRIAC turns off correctly at the end of each half-cycle of the AC in the main circuit. For higher-powered, more-demanding loads, two SCRs in inverse parallel may be used instead of one TRIAC. Because each SCR will have an entire half-cycle of reverse polarity voltage applied to it, turn-off of the SCRs is assured, no matter what the character of the load.
Um TRIAC, ou Triode for Alternating Current é um componente eletrônico equivalente a dois retificadores controlados de silício (SCR/tiristores) ligados em antiparalelo e com o terminal de disparo (ou gatilho - gate) ligados juntos. Este tipo de ligação resulta em uma chave eletrônica bidirecional que pode conduzir a corrente elétrica nos dois sentidos. O TRIAC faz parte da família de tiristores.
Um TRIAC pode ser disparado por uma corrente alternada aplicada no terminal de disparo (gate). Uma vez disparado, o dispositivo continua a conduzir até que a corrente elétrica caia abaixo do valor de corte, como o valor da tensão final da metade do ciclo de uma corrente alternada. Isto torna o TRIAC um conveniente dispositivo de controle para circuitos de corrente alternada ou C.A, que permite acionar grandes potências com circuitos acionados por correntes da ordem de miliamperes.
Também podemos controlar o início da condução do dispositivo, aplicando um pulso em um ponto pré-determinado do ciclo de corrente alternada, o que permite controlar a percentagem do ciclo que estará alimentando a carga (também chamado de controle de fase).
O TRIAC de baixa potência é utilizado em várias aplicações como controles de potência para lâmpadas dimmers, controles de velocidade para ventiladores entre outros. Contudo, quando usado com cargas indutivas, como motores elétricos, é necessário que se assegure que o TRIAC seja desligado corretamente, no final de cada semi-ciclo de alimentação elétrica. Para circuitos de maior potência, podemos utilizar dois SCRs ligados em antiparalelo, o que garante que cada SCR estará controlando um semi-ciclo independente, não importando a natureza da carga geral. -
Variable Capacitor
Variable Capacitor
Capacitor Variável -
Variable Capacitors types
Variable Capacitors types
Tipos de Capacitores Variáveis -
43
43
Capacitores variáveis são capacitores que podem ter sua capacitância ajustada numa certa faixa de valores a partir de um ajuste por parafuso ou ainda por um eixo onde é preso um botão.
Os mais comuns são usados em circuitos de sintonia.
Esses capacitores são normalmente de pequenas capacitâncias com valores típicos na faixa de 1 pF a 400 pF.
Sua especificação é normalmente a capacitância máxima ou ainda a faixa de capacitâncias que pode varrer. Por exemplo, um "trimmer" de 2-20 pF é um capacitor que pode ter sua capacitância ajustada para apresentar qualquer valor entre 2 e 20 pF.
O que devemos testar
Dificilmente esses componentes apresentam problemas de estarem abertos (sem capacitância). O mais comum é que apresentem curtos entre as armaduras (conjunto móvel e fixo), o que os inutiliza.
Assim a prova básica consiste em se verificar se as armaduras não se tocam quando ajustamos o componente percorrendo toda a sua faixa de valores.
Eventualmente, com a ajuda de um capacímetro sensível podemos medir a faixa faixa de variação de capacitância desses componentes.
Instrumentos Usados no Teste
* Provador de continuidade
* Multímetro
* Capacímetro
Provas alternativas podem ser feitas com o uso de instrumentos mais sofisticados como o osciloscópio, freqüencímetro e gerador de sinais, pontes, etc, conforme veremos também.
Que Capacitores podem Ser Provados
Trimmers e capacitores variáveis de todos os tipos na faixa de 1 a 400 pF ou mais de capacitância máxima.
Procedimento
1. Prova de Isolamento
a) Coloque o multímetro em qualquer escala de resistências e zere-o. Se usar o provador de continuidade, apenas prepare-o para uso.
b) Desligue os terminais dos componente em teste se ele estiver num circuito. Normalmente, os trimmers e variáveis estão em paralelo com bobinas que, apresentando baixas resistências dariam uma falsa indicação de curto-circuito.
c) Encoste as pontas de prova do multímetro ou provador de continuidade nos terminais do capacitor em teste. AJuste então o trimmer ou variável para percorrer toda a faixa de c apacitâncias. Faça isso vagarosamente atento à indicação do instrumento usado.
Interpretação dos Resultados
Em qualquer posição do ajuste do componente em teste, a resistência deve ser infinita (não deve haver movimento da agulha ou sinal do provador de continuidade).
Se em qualquer posição houver uma indicação de baixa resistência (movimento da agulha do multímetro, indicação de zero se for digital ou ainda sinal do provador de continuidade) é sinal de que existem curtos entre o conjunto de placas móveis e o conjunto de placas fixas do componente.
2. Medida de Capacitância
A medida de capacitância com um capacímetro digital é imediata, bastando ligar os terminais do componente ao instrumento e fazer variar sua capacitância, lendo os resultados.
Capacímetros digitais de preços bastante acessíveis podem ser encontrados no mercado especializado.
Outras Provas
Pontes e o osciloscópio também podem ser usados para se testar c apacitores variáveis e trimmers determinando-se seus valores. Entretanto, como se trata de componentes de baixas capacitâncias, a freqüência usada no teste deve ser de 1 a 10 MHz tipicamente e o detector de nulo deve ser um circuito capaz de operar com essas freqüências.
Observações
O problema mais comum dos variáveis antigos de rádios eoutros aparelhos que possuem placas móveis e fixas separadas pelo ar é que essas placas entortam encostando uma nas outras.
Nesses casos, com muito cuidado é possível desentortar uma eventual placa torta e reparar o componente. -
Capacitors
Capacitors
Capacitores -
Also known as a condenser, a capacitor is a passive two-terminal electrical component that stores potential energy in an electric field. Most capacitors contain at least two electrical conductors often in the form of metallic plates or surfaces separated by a dielectric medium. Dielectric is an electrical insulator with low electrical conduction. Dielectric has many benefits; one of those is that we can put a small separation between the electrical conductors’ plates, without they get in touch. Any substance when subjected to intense electric fields can become a conductor, for this reason dielectrics are more used as insulators than air, because when air is subjected to an intense electric field, it becomes a conductor. Capacitors are used in various types of electrical circuits, in cameras loading loads for the flash, for example. They can have a cylindrical or flat format, depends on the circuit they are being used.
Also known as a condenser, a capacitor is a passive two-terminal electrical component that stores potential energy in an electric field. Most capacitors contain at least two electrical conductors often in the form of metallic plates or surfaces separated by a dielectric medium. Dielectric is an electrical insulator with low electrical conduction. Dielectric has many benefits; one of those is that we can put a small separation between the electrical conductors’ plates, without they get in touch. Any substance when subjected to intense electric fields can become a conductor, for this reason dielectrics are more used as insulators than air, because when air is subjected to an intense electric field, it becomes a conductor.
Capacitors are used in various types of electrical circuits, in cameras loading loads for the flash, for example. They can have a cylindrical or flat format, depends on the circuit they are being used.
Também chamado de condensador, ele é um dispositivo de circuito elétrico que tem como função armazenar cargas elétricas e consequente energia eletrostática, ou elétrica. Ele é constituído de duas peças condutoras que são chamadas de armaduras. Entre essas armaduras existe um material que é chamado de dielétrico. Dielétrico é uma substância isolante que possui alta capacidade de resistência ao fluxo de corrente elétrica. A utilização dos dielétricos tem várias vantagens. A mais simples de todas elas é que com o dielétrico podemos colocar as placas do condutor muito próximas sem o risco de que eles entrem em contato. Qualquer substância que for submetida a uma intensidade muito alta de campo elétrico pode ser tornar condutor, por esse motivo é que o dielétrico é mais utilizado do que o ar como substância isolante, pois se o ar for submetido a um campo elétrico muito alto ele acaba por se tornar condutor.
Os capacitores são utilizados nos mais variados tipos de circuitos elétricos, nas máquinas fotográficas armazenando cargas para o flash, por exemplo. Eles podem ter o formato cilíndrico ou plano, dependendo do circuito ao qual ele está sendo empregado. -
Circuits and ICs
Circuits and ICs
Circuitos e CI'S -
Electricity is the set of physical phenomena associated with the presence and motion of electric charge. Various common phenomena are related to electricity, including lightning, static electricity, electric heating and electric current in electrical wires. Besides that, electricity includes the electromagnetic field and electromagnetic induction. The New Latin adjective electricus, originally meaning 'of amber', was first used to refer to amber's attractive properties by William Gilbert in his 1600 text De Magnete. The term came from the classical Latin electrum, amber, from the Greek ἤλεκτρον (elektron), amber, to refer to the property of attracting small objects after being rubbed.
Electricity is the set of physical phenomena associated with the presence and motion of electric charge.
Various common phenomena are related to electricity, including lightning, static electricity, electric heating and electric current in electrical wires. Besides that, electricity includes the electromagnetic field and electromagnetic induction.
The New Latin adjective electricus, originally meaning 'of amber', was first used to refer to amber's attractive properties by William Gilbert in his 1600 text De Magnete.
The term came from the classical Latin electrum, amber, from the Greek ἤλεκτρον (elektron), amber, to refer to the property of attracting small objects after being rubbed.A eletricidade é um termo geral que abrange uma variedade de fenômenos resultantes da presença e do fluxo de carga elétrica, onde necessariamente tem que haver moviento de elétrons.
Esses incluem muitos fenômenos facilmente reconhecíveis, tais como relâmpagos, eletricidade estática, e correntes elétricas em fios elétricos. Além disso, a eletricidade engloba conceitos menos conhecidos, como o campo eletromagnético e indução eletromagnética.
A palavra deriva do termo em neolatim "ēlectricus", que por sua vez deriva do latim clássico "electrum", "amante do âmbar", termo esse cunhado a partir do termo grego ήλεκτρον (elétrons) no ano de 1600 e traduzido para o português como âmbar. O termo remonta às primeiras observações mais atentas sobre o assunto, feitas esfregando-se pedaços de âmbar e pele.
No uso geral, a palavra "eletricidade" se refere de forma igualmente satisfatória a uma série de efeitos físicos. Em um contexto científico, no entanto, o termo é muito geral para ser empregado de forma única, e conceitos distintos contudo a ele diretamente relacionados são usualmente melhor identificados por termos ou expressões específicos. -
Voltage, electric potential difference, electric pressure or electric tension (formally denoted ∆V or ∆U, but more often simply as V or U) is the difference in electric potential between two points. Voltage is measured in units of volts - in honor of the Italian physicist Alessandro Volta. The voltage between two points is equal to the work done per unit of charge against a static electric field to move a test charge between two points. A voltage may represent either a source of energy (electromotive force) or lost, used, or stored energy (potential drop). A voltmeter can be used to measure the voltage (or potential difference) between two points in a system; often a common reference potential such as the ground of the system is used as one of the points. Electric potential differences between points can be caused by static electric fields, by electric current through a magnetic field, by time-varying magnetic fields, or some combination of these three.
Voltage, electric potential difference, electric pressure or electric tension (formally denoted ∆V or ∆U, but more often simply as V or U) is the difference in electric potential between two points. Voltage is measured in units of volts - in honor of the Italian physicist Alessandro Volta. The voltage between two points is equal to the work done per unit of charge against a static electric field to move a test charge between two points. A voltage may represent either a source of energy (electromotive force) or lost, used, or stored energy (potential drop). A voltmeter can be used to measure the voltage (or potential difference) between two points in a system; often a common reference potential such as the ground of the system is used as one of the points. Electric potential differences between points can be caused by static electric fields, by electric current through a magnetic field, by time-varying magnetic fields, or some combination of these three.
Tensão elétrica (denotada por ∆V), também conhecida como diferença de potencial (DDP), é a diferença de potencial elétrico entre dois pontos ou a diferença em energia potencial elétrica por unidade de carga elétrica entre dois pontos. Sua unidade de medida é o volt – homenagem ao físico italiano Alessandro Volta. A diferença de potencial é igual ao trabalho que deve ser feito, por unidade de carga contra um campo elétrico para se movimentar uma carga qualquer. Uma diferença de potencial pode representar tanto uma fonte de energia (força eletromotriz), quanto pode representar energia "perdida" ou armazenada (queda de tensão). Um voltímetro pode ser utilizado para se medir a DDP entre dois pontos em um sistema, sendo que usualmente um ponto referencial comum é a terra. A tensão elétrica pode ser causada por campos elétricos estáticos, por uma corrente elétrica sob a ação de um campo magnético, por campo magnético variante ou uma combinação de todos os três -
An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire, when there is a potential difference between the conductor’s ends. The moving charged particles seek to restore the lost balance due for the electric field action or others (chemical reactions, friction, light…).
An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire, when there is a potential difference between the conductor’s ends. The moving charged particles seek to restore the lost balance due for the electric field action or others (chemical reactions, friction, light…).
Corrente elétrica é o fluxo ordenado de partículas portadoras de carga elétrica, ou também, é o deslocamento de cargas dentro de um condutor, quando existe uma diferença de potencial elétrico entre as extremidades. Tal deslocamento procura restabelecer o equilíbrio desfeito pela ação de um campo elétrico ou outros meios (reações químicas, atrito, luz, etc.)