DinizApp/Electronics Center
-
Also known as a condenser, a capacitor is a passive two-terminal electrical component that stores potential energy in an electric field. Most capacitors contain at least two electrical conductors often in the form of metallic plates or surfaces separated by a dielectric medium. Dielectric is an electrical insulator with low electrical conduction. Dielectric has many benefits; one of those is that we can put a small separation between the electrical conductors’ plates, without they get in touch. Any substance when subjected to intense electric fields can become a conductor, for this reason dielectrics are more used as insulators than air, because when air is subjected to an intense electric field, it becomes a conductor. Capacitors are used in various types of electrical circuits, in cameras loading loads for the flash, for example. They can have a cylindrical or flat format, depends on the circuit they are being used.
Also known as a condenser, a capacitor is a passive two-terminal electrical component that stores potential energy in an electric field. Most capacitors contain at least two electrical conductors often in the form of metallic plates or surfaces separated by a dielectric medium. Dielectric is an electrical insulator with low electrical conduction. Dielectric has many benefits; one of those is that we can put a small separation between the electrical conductors’ plates, without they get in touch. Any substance when subjected to intense electric fields can become a conductor, for this reason dielectrics are more used as insulators than air, because when air is subjected to an intense electric field, it becomes a conductor.
Capacitors are used in various types of electrical circuits, in cameras loading loads for the flash, for example. They can have a cylindrical or flat format, depends on the circuit they are being used.
Também chamado de condensador, ele é um dispositivo de circuito elétrico que tem como função armazenar cargas elétricas e consequente energia eletrostática, ou elétrica. Ele é constituído de duas peças condutoras que são chamadas de armaduras. Entre essas armaduras existe um material que é chamado de dielétrico. Dielétrico é uma substância isolante que possui alta capacidade de resistência ao fluxo de corrente elétrica. A utilização dos dielétricos tem várias vantagens. A mais simples de todas elas é que com o dielétrico podemos colocar as placas do condutor muito próximas sem o risco de que eles entrem em contato. Qualquer substância que for submetida a uma intensidade muito alta de campo elétrico pode ser tornar condutor, por esse motivo é que o dielétrico é mais utilizado do que o ar como substância isolante, pois se o ar for submetido a um campo elétrico muito alto ele acaba por se tornar condutor.
Os capacitores são utilizados nos mais variados tipos de circuitos elétricos, nas máquinas fotográficas armazenando cargas para o flash, por exemplo. Eles podem ter o formato cilíndrico ou plano, dependendo do circuito ao qual ele está sendo empregado. -
Circuits and ICs
Circuits and ICs
Circuitos e CI'S -
Electricity is the set of physical phenomena associated with the presence and motion of electric charge. Various common phenomena are related to electricity, including lightning, static electricity, electric heating and electric current in electrical wires. Besides that, electricity includes the electromagnetic field and electromagnetic induction. The New Latin adjective electricus, originally meaning 'of amber', was first used to refer to amber's attractive properties by William Gilbert in his 1600 text De Magnete. The term came from the classical Latin electrum, amber, from the Greek ἤλεκτρον (elektron), amber, to refer to the property of attracting small objects after being rubbed.
Electricity is the set of physical phenomena associated with the presence and motion of electric charge.
Various common phenomena are related to electricity, including lightning, static electricity, electric heating and electric current in electrical wires. Besides that, electricity includes the electromagnetic field and electromagnetic induction.
The New Latin adjective electricus, originally meaning 'of amber', was first used to refer to amber's attractive properties by William Gilbert in his 1600 text De Magnete.
The term came from the classical Latin electrum, amber, from the Greek ἤλεκτρον (elektron), amber, to refer to the property of attracting small objects after being rubbed.A eletricidade é um termo geral que abrange uma variedade de fenômenos resultantes da presença e do fluxo de carga elétrica, onde necessariamente tem que haver moviento de elétrons.
Esses incluem muitos fenômenos facilmente reconhecíveis, tais como relâmpagos, eletricidade estática, e correntes elétricas em fios elétricos. Além disso, a eletricidade engloba conceitos menos conhecidos, como o campo eletromagnético e indução eletromagnética.
A palavra deriva do termo em neolatim "ēlectricus", que por sua vez deriva do latim clássico "electrum", "amante do âmbar", termo esse cunhado a partir do termo grego ήλεκτρον (elétrons) no ano de 1600 e traduzido para o português como âmbar. O termo remonta às primeiras observações mais atentas sobre o assunto, feitas esfregando-se pedaços de âmbar e pele.
No uso geral, a palavra "eletricidade" se refere de forma igualmente satisfatória a uma série de efeitos físicos. Em um contexto científico, no entanto, o termo é muito geral para ser empregado de forma única, e conceitos distintos contudo a ele diretamente relacionados são usualmente melhor identificados por termos ou expressões específicos. -
Voltage, electric potential difference, electric pressure or electric tension (formally denoted ∆V or ∆U, but more often simply as V or U) is the difference in electric potential between two points. Voltage is measured in units of volts - in honor of the Italian physicist Alessandro Volta. The voltage between two points is equal to the work done per unit of charge against a static electric field to move a test charge between two points. A voltage may represent either a source of energy (electromotive force) or lost, used, or stored energy (potential drop). A voltmeter can be used to measure the voltage (or potential difference) between two points in a system; often a common reference potential such as the ground of the system is used as one of the points. Electric potential differences between points can be caused by static electric fields, by electric current through a magnetic field, by time-varying magnetic fields, or some combination of these three.
Voltage, electric potential difference, electric pressure or electric tension (formally denoted ∆V or ∆U, but more often simply as V or U) is the difference in electric potential between two points. Voltage is measured in units of volts - in honor of the Italian physicist Alessandro Volta. The voltage between two points is equal to the work done per unit of charge against a static electric field to move a test charge between two points. A voltage may represent either a source of energy (electromotive force) or lost, used, or stored energy (potential drop). A voltmeter can be used to measure the voltage (or potential difference) between two points in a system; often a common reference potential such as the ground of the system is used as one of the points. Electric potential differences between points can be caused by static electric fields, by electric current through a magnetic field, by time-varying magnetic fields, or some combination of these three.
Tensão elétrica (denotada por ∆V), também conhecida como diferença de potencial (DDP), é a diferença de potencial elétrico entre dois pontos ou a diferença em energia potencial elétrica por unidade de carga elétrica entre dois pontos. Sua unidade de medida é o volt – homenagem ao físico italiano Alessandro Volta. A diferença de potencial é igual ao trabalho que deve ser feito, por unidade de carga contra um campo elétrico para se movimentar uma carga qualquer. Uma diferença de potencial pode representar tanto uma fonte de energia (força eletromotriz), quanto pode representar energia "perdida" ou armazenada (queda de tensão). Um voltímetro pode ser utilizado para se medir a DDP entre dois pontos em um sistema, sendo que usualmente um ponto referencial comum é a terra. A tensão elétrica pode ser causada por campos elétricos estáticos, por uma corrente elétrica sob a ação de um campo magnético, por campo magnético variante ou uma combinação de todos os três -
An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire, when there is a potential difference between the conductor’s ends. The moving charged particles seek to restore the lost balance due for the electric field action or others (chemical reactions, friction, light…).
An electric current is a flow of electric charge. In electric circuits this charge is often carried by moving electrons in a wire, when there is a potential difference between the conductor’s ends. The moving charged particles seek to restore the lost balance due for the electric field action or others (chemical reactions, friction, light…).
Corrente elétrica é o fluxo ordenado de partículas portadoras de carga elétrica, ou também, é o deslocamento de cargas dentro de um condutor, quando existe uma diferença de potencial elétrico entre as extremidades. Tal deslocamento procura restabelecer o equilíbrio desfeito pela ação de um campo elétrico ou outros meios (reações químicas, atrito, luz, etc.) -
The electrical resistance of an electrical conductor is a measure of the difficulty to pass an electric current through that conductor. The first Ohm's Law calculates the electrical resistance, and its SI unit is the ohm (Ω). When an electrical current is stablished in a metallic conductor, a high number of electrons can flow freely in this conductor. In this movement, the electrons collide with each other and with the atoms that constitute the metal. Therefore, the electrons have some difficult to move in, in other words, there is a difficulty to pass an electric current through that conductor.
The electrical resistance of an electrical conductor is a measure of the difficulty to pass an electric current through that conductor. The first Ohm's Law calculates the electrical resistance, and its SI unit is the ohm (Ω).
When an electrical current is stablished in a metallic conductor, a high number of electrons can flow freely in this conductor. In this movement, the electrons collide with each other and with the atoms that constitute the metal. Therefore, the electrons have some difficult to move in, in other words, there is a difficulty to pass an electric current through that conductor.Resistência elétrica é a capacidade de um corpo qualquer se opor à passagem de corrente elétrica mesmo quando existe uma diferença de potencial aplicada. Seu cálculo é dado pela Primeira Lei de Ohm, e, segundo o Sistema Internacional de Unidades (SI), é medida em ohms.
Quando uma corrente elétrica é estabelecida em um condutor metálico, um número muito elevado de elétrons livres passa a se deslocar nesse condutor. Nesse movimento, os elétrons colidem entre si e também contra os átomos que constituem o metal. Portanto, os elétrons encontram uma certa dificuldade para se deslocar, isto é, existe uma resistência à passagem da corrente no condutor. -
Click here!
Click here!
Clique aqui! -
Electricity
Electricity
Eletricidade -
Voltage
Voltage
tensão -
Electric current
Electric current
corrente -
Electrical resistance
Electrical resistance
resistência -
A semiconductor diode is a two-terminal electronic component. The most common type, is a crystalline piece of semiconductor material with a p–n junction connected to two electrical terminals. Most diodes are made of silicon, but other materials such as selenium and germanium are also used. It’s the simplest semiconductor electronic component, used as electrical current rectifier and other applications. It has a voltage drop about 0,3V (germanium) and 0,7V (silicon). Diode works as an auto-start switch (closed when it is directly polarized and open when it is inversely polarized). The greater difference is that when directly polarized, there is a bigger voltage drop in diode than it has in mechanical switches (0,7V in silicon diode). So, in a 10V voltage source, a directly polarized diode in series with a resistance makes a 9,3V voltage drop in the resistance (0,7V remain in the diode). In reverse bias, the diode works as an open switch, since current doesn’t flow, there will be no voltage on the resistor, which stays retained in the diode. That is, there is a 10V voltage on the diode terminals. The main function of a semiconductor diode, in current rectifier circuits, is to transform alternate current in pulsating direct current. The main function of a semiconductor diode, in direct current circuits, is to control the current flow, allowing the electric current to pass in only one direction.
A semiconductor diode is a two-terminal electronic component. The most common type, is a crystalline piece of semiconductor material with a p–n junction connected to two electrical terminals. Most diodes are made of silicon, but other materials such as selenium and germanium are also used.
It’s the simplest semiconductor electronic component, used as electrical current rectifier and other applications. It has a voltage drop about 0,3V (germanium) and 0,7V (silicon).
Diode works as an auto-start switch (closed when it is directly polarized and open when it is inversely polarized). The greater difference is that when directly polarized, there is a bigger voltage drop in diode than it has in mechanical switches (0,7V in silicon diode). So, in a 10V voltage source, a directly polarized diode in series with a resistance makes a 9,3V voltage drop in the resistance (0,7V remain in the diode). In reverse bias, the diode works as an open switch, since current doesn’t flow, there will be no voltage on the resistor, which stays retained in the diode. That is, there is a 10V voltage on the diode terminals.
The main function of a semiconductor diode, in current rectifier circuits, is to transform alternate current in pulsating direct current. The main function of a semiconductor diode, in direct current circuits, is to control the current flow, allowing the electric current to pass in only one direction.
Diodo semicondutor é um elemento ou componente eletrônico composto de cristal semicondutor de silício ou germânio numa película cristalina cujas faces opostas são dopadas por diferentes materiais durante sua formação, que causa a polarização de cada uma das extremidades.
É o tipo mais simples de componente eletrônico semicondutor, usado como retificador de corrente elétrica entre outras aplicações. Possui uma queda de tensão de, aproximadamente, 0,3 V (germânio) e 0,7 V (silício)
O diodo funciona como uma chave de acionamento automático (fechada quando o diodo está diretamente polarizado e aberta quando o diodo está inversamente polarizado). A diferença mais substancial é que, quando diretamente polarizado, há uma queda de tensão no diodo muito maior do que aquela que geralmente se observa em chaves mecânicas (no caso do diodo de silício, 0,7 V). Assim, uma fonte de tensão de 10 V, polarizando diretamente um diodo em série com uma resistência, faz com que haja uma queda de tensão de 9,3 V na resistência, pois 0,7 V ficam no diodo. Na polarização inversa, acontece o seguinte: o diodo faz papel de uma chave aberta, já que não circula corrente, não haverá tensão no resistor, a tensão fica toda retida no diodo, ou seja, nos terminais do diodo há uma tensão de 10 V.
A principal função de um diodo semicondutor, em circuitos retificadores de corrente, é transformar corrente alternada em corrente contínua pulsante. Como no semiciclo negativo de uma corrente alternada o diodo faz a função de uma chave aberta, não passa corrente elétrica no circuito (considerando o “sentido convencional de corrente”, do “positivo” para o “negativo”). A principal função de um diodo semicondutor, em circuitos de corrente contínua, é controlar o fluxo da corrente, permitindo que a corrente elétrica circule apenas em um sentido -
57
57
Diodo Zener (também conhecido como diodo regulador de tensão , diodo de tensão constante, diodo de ruptura ou diodo de condução reversa) é um dispositivo ou componente eletrônico semelhante a um diodo semicondutor, especialmente projetado para trabalhar sob o regime de condução inversa, ou seja, acima da tensão de ruptura da junção PN, neste caso há dois fenômenos envolvidos o efeito Zener e o efeito avalanche.O dispositivo leva o nome em homenagem a Clarence Zener, que descobriu esta propriedade elétrica.
Qualquer diodo inversamente polarizado praticamente não conduz corrente desde que não ultrapasse a tensão de ruptura. Na realidade, existe uma pequena corrente inversa, chamada de corrente de saturação, que ocorre devido unicamente à geração de pares de elétron-lacuna na região de carga espacial, à temperatura ambiente. No diodo Zener acontece a mesma coisa. A diferença é que, no diodo convencional, ao atingir uma determinada tensão inversa, a corrente inversa aumenta bruscamente (efeito de avalanche), causando o efeito Joule, e consequentemente a dissipação da energia térmica acaba por destruir o dispositivo, não sendo possível reverter o processo. No diodo Zener, por outro lado, ao atingir uma tensão chamada de Zener (geralmente bem menor que a tensão de ruptura de um diodo comum[carece de fontes]), o dispositivo passa a permitir a passagem de correntes bem maiores que a de saturação inversa, mantendo constante a tensão entre os seus terminais. Cada diodo Zener possui uma tensão de Zener específica como, por exemplo, 5,1 Volts, 6,3 Volts, 9,1 Volts, 12 Volts e 24 Volts.
Quanto ao valor da corrente máxima admissível unilateralmente, existem vários tipos de diodos. Um dado importante na especificação do componente a ser utilizado é a potência do dispositivo. Por exemplo, existem diodos Zener de 400 mili Watts e 1 Watt. O valor da corrente máxima admissível depende dessa potência e da tensão de Zener. É por isso que o diodo Zener se encontra normalmente associado com uma resistência ligada em série, destinada precisamente a limitar a corrente a um valor admissível. -
Zener Diode
Zener Diode
Diodo Zener -
Complete the table with the information and click calculate. (use dot instead of comma):
Complete the table with the information and click calculate.
(use dot instead of comma):Preencha com os dados da tabela e clique em calcular.
(use ponto no lugar de vírgula): -
____Code_______Vz______Potency_______
____Code_______Vz______Potency_______
____Código_______Vz______Potência_______ -
This resource is only available in Pro Version.
This resource is only available
in Pro Version.Este recurso está disponível
somente na versão Pro.
-
3 Digits SMD-resistor
3 Digits SMD-resistor
Resistor SMD 3 Dígitos -
Underline
Underline
Sublinhado -
For 1% tolerance resistors, there is a new codification known as EIA-90.
For 1% tolerance resistors, there is a
new codification known as EIA-90.Para resistores com 1% de tolerância foi criada uma
nova codificação conhecida por EIA-90.